Untitled

ete LI
dener
Mapecr
Mapecrete LI
Har
Hardener
Mapecr
Har
Surface treatment in liquid form with a consolidating effect for new or old concrete floors and concrete surfaces with a dry-shake hardener finishing craft workshops, etc.) made from concrete and Mapecrete LI Hardener is a watery solution of modified flooring with cementitous dry-shake.
lithium silicates for treating the surface of cementitious substrates. It penetrates into the porosity and • Surface protection of cementitious floors to increase chemically reacts with the free lime in the cementitious their resistance to abrasion, scratches and aesthetic substrate to form a dense micro-structure which is chemically durable and resistant to abrasion. After polishing, floors treated with Mapecrete LI Hardener, • Final surface treatment after polishing concrete are shinier, cleaner, dust-repellent and more resistant • Dust-repellent treatment for industrial and civil floors.
WHERE TO USEMapecrete LI Hardener is suitable for new or old industrial and civil cementitious floors. It has the Mapecrete LI Hardener is an inorganic liquid which capacity of closing the porosity of the cementitious penetrates superficially into the porosity of cementitious paste and, therefore, increasing the strength of the materials and reacts with the lime which is normally produced during the hydration phase of the cement to This product is suitable for application on old floors form highly-resistant, non-soluble lithium silicates which to bring back shine, cleanliness and strength to the increase the density and strengthen the cementitious Mapecrete LI Hardener increases the durability Mapecrete LI Hardener has been studied in the of the floor through the beneficial effect of the lithium MAPEI R&D laboratories. It is not a film-forming product salts against the aggregate alkali reaction from and, therefore, does not form a continuous layer on which many floors suffer due to the effect of reactive the surfaces treated. As a result, it is not subject to Beyond better mechanical characteristics, cementitious Mapecrete LI Hardener is a solution of modified lithium floors treated with Mapecrete LI Hardener are more silicates which are resistant to UV rays, which makes resistant to aesthetic defects, such as efflorescence and it suitable for application on both internal and external surfaces.
Mapecrete LI Hardener is made with lithium silicates which penetrate more efficiently than other silicates • Surface consolidation of industrial and civil floors (e.g. sodium and potassium), and has a beneficial (warehouses, shopping centres, car-parks, garages, effect on the protection against the destructive reaction 571_mapecrete li hardener_gb (17.02.2012 - 6ª Bozza/Ciano/PDF) of reactive aggregates by not contributing to must be removed manually or with suitable ete LI
the increase of the concentration of sodium mechanical means and the treated surface dener
After completing the application and drying Mapecr
Mapecrete LI
Har
Hardener
Mapecr
Har
• Non-filming treatment which chemically following day before stepping on the surface, even if the consolidating effect of the product • Penetrates superficially to form strong, • Reduces the formation of dust and keeps • Increases the durability of floors.
0.2-0.4 kg/m² according to the level of • Does not contain sodium or potassium which may provoke damaging alkali-aggregate reactions.
• Compatible with the environment and is not Mapecrete LI Hardener may be stored for up to 12 months in its original packaging • Do not apply Mapecrete LI Hardener on dusty and/or crumbling or flimsy substrates.
hazardous according to current standards • Before applying Mapecrete LI Hardener, and regulations regarding the classification of mixtures. It is however recommended to use gloves, eyes protection and to take the usual • Do not use Mapecrete LI Hardener for sealing cracks and protect treated surfaces For further and complete information about the safe use of our product please refer to our latest version of the Material Safety Mapecrete LI Hardener may be applied on both polished or with a dry-shake hardener surfaces, such as Mapetop N AR6, and after cutting the joints where required. If the product is applied on surfaces which are already cured, the treatment may be carried recommendations contained in this product data sheet correspond to the best of our Concrete surfaces including those with a dry-shake hardener such as Mapetop N AR6 information must, in every case, be taken as merely indicative and subject to confirmation sound, perfectly clean, dry and free of all after long-term practical application: for traces of dust, film-forming anti-evaporation this reason, anyone who intends to use the products, grease, oil and any other substance product must ensure beforehand that it is suitable for the envisaged application: in consolidating liquid from penetrating.
every case, the user alone is fully responsible for any consequences deriving from the use spraying it on the surface to be treated with a low pressure pump or poured directly on Please refer to the current version of the the floor and then immediately spread out in Technical Data Sheet, available from our an even coat. In both cases, the part of the floor treated must be kept constantly wet for at least 20-30 minutes with Mapecrete LI Hardener to allow it to penetrate into the substrate. During this phase, it is very important that there are no dry and wet At the end of the phase when the surface is kept constantly wet, any excess liquid Ion chloride content - minimum requirement ≤ 0.05%– according to EN 1015-17 (%): Hazard classification according to EC 1999/45: none. Before using refer to the “Safety instructions for preparation and application” paragraph and the information on the packaging and Safety Data Sheet Minimum waiting time for the product to penetrate: ete LI
dener
Mapecr
Mapecrete LI
Har
Hardener
Mapecr
Har
here is prohibited and subject to prosecution Any reproduction of texts, photos and illustrations published BUILDING THE FUTURE

Source: http://www.davideo.ro/upl/produse/fisa_14167.pdf

Jap december 87/6

Skeletal muscle energy metabolism during prolonged, fatiguing exercise Mark A. Febbraio and Jane Dancey Journal of Applied Physiology 87:2341-2347, 1999. You might find this additional information useful. This article cites 37 articles, 27 of which you can access free at: This article has been cited by 2 other HighWire hosted articles: Evidence for complex system integration and

The heartbeat clinic

What is a tilt table test? Blood pressure is regulated by a set of nerves which operate continuously and subconsciously and are part of the autonomic nervous system. This set of nerves detects certain bodily needs and they respond by causing the appropriate changes in blood pressure. Tilt table testing is designed to evaluate how your body regulates blood pressure in response to some very

Copyright © 2010-2014 Metabolize Drugs Pdf